If you own a Gravely mower, you know how important it is to keep it running smoothly.
Getting the deck lowered is one of the most common maintenance tasks you will have to do.
Lowering the deck on your Gravely mower is a simple process that can help you achieve a clean, even cut.
In this post, we will guide you through the steps of how to lower the deck on your Gravely mower.
How to Lower Deck on Gravely Mower
Step 1: Park your mower on a level surface
Before you begin to lower the deck on your Gravely mower, make sure that you park it on a level surface.
This will prevent the mower from tipping over or causing any other damage.
Step 2: Lower the deck to its lowest setting
Next, you will need to lower the deck of your Gravely mower to its lowest setting.
You can do this by using the lever on the side of the mower deck. Depending on the model of your Gravely mower,
The lever may be located on the right or left side of the mower.
Step 3: Disconnect the mower deck
After you have lowered the deck to its lowest setting, you will need to disconnect it from the mower.
This is typically done by removing the pins or bolts that hold the deck in place.
Make sure you keep these pins or bolts in a safe place so you can easily reinstall the deck when you are done.
Step 4: Adjust the height of the deck
Now that the deck is disconnected from the mower, you can adjust the height of the deck.
You can do this by using the adjustment knobs or levers on the side of the deck.
These knobs or levers will allow you to adjust the height of the deck to your desired setting.
Read Where does the Spring go on a Mower Deck(Explained)
Step 5: Reattach the deck
Once you have adjusted the height of the deck, you can reattach it to the mower. Make sure you use the same pins or bolts that you removed earlier to secure the deck in place.
Step 6: Check the height of the deck
After you have reattached the deck, it is important to check the height of the deck again to make sure it is set to your desired height.
You can do this by using a tape measure to measure the distance between the ground and the underside of the deck.
Step 7: Test the mower
Finally, you can test the mower to make sure it is running smoothly and cutting evenly.
Take your Gravely mower out for a test run and make any necessary adjustments to the deck height to achieve the perfect cut.
In summary, lowering the deck on your Gravely mower is a simple process that can help you achieve a clean and even cut.
Note:
As a reminder, you need to take care of your Gravely mower regularly to make sure it runs well and lasts for many years.
This includes changing the oil, replacing the air filter, and checking the spark plugs.
Read Are Craftsman Mower Decks Interchangeable(Explained)
By taking care of your Gravely mower in these simple ways, you can make it last longer and keep your lawn looking great all season.
Read John Deere 54 vs 60 Deck (Which One Should You Choose?)
Gravely Mower Deck Height Adjustment
- Park your mower on a flat and level surface, ensuring the engine is turned off and the parking brake is engaged for safety.
- Locate the deck height adjustment mechanism. The specific location and design may vary depending on the model of your Gravely mower. Typically, there are levers or knobs near each wheel or on the mower deck itself.
- Identify the desired cutting height. Numerous cutting height options are typically available on gravel mowers, and the adjustment mechanism will display numbers or settings to indicate them.
- Adjust the cutting height. Depending on your mower model, you may need to lift the mower deck slightly to disengage the locking mechanism. Then, move the levers or turn the knobs to raise or lower the deck to your desired cutting height. Some models may have individual adjustments for each wheel, while others may have a single adjustment that controls all wheels simultaneously.
- Check the deck height. Once you have made the adjustments, visually inspect the mower deck to ensure it is level. If necessary, make further adjustments to the individual wheels or the overall deck height until it is even.
- Test and fine-tune. Start the engine and engage the cutting blades. Move the mower forward slowly and observe the cutting performance. If the grass is not being cut evenly or if it feels too low or high, make additional adjustments to achieve the desired cutting height.
Read Are Gator Blades Worth It?(Find Out Now)
FAQ
Why do I need to lower the deck on my Gravely mower?
Lowering the deck on your Gravely mower helps achieve a clean and even cut. This is important for maintaining a healthy and attractive lawn.
How often should I lower the deck on my Gravely mower?
How often you lower the deck on your Gravely mower will depend on how tall your grass is and how long you want your lawn to be.
In general, you may need to lower the deck every time you mow or once a week during the growing season.
Read How Can I tell how old my Gravely Mower is(3 Easy Ways)
Can I lower the deck on my Gravely mower without disconnecting it from the mower?
No, you shouldn’t lower the deck of your Gravely mower without first taking it off the mower. This can be dangerous and may cause damage to the mower or injury to the operator.
How do I know if my deck is too low?
If the deck is too low, it can scalp the grass, leaving brown patches on your lawn. To avoid this, it is important to check the height of the deck before and after lowering it and adjust it accordingly.
Read How to Hold Up Mower Discharge Chute(In 5 Steps)
What tools do I need to lower the deck on my Gravely mower?
You will need a set of pliers, a wrench, or a socket set to remove the pins or bolts that hold the deck in place.
Can I lower the deck on my Gravely mower if it is uneven?
If the deck of your Gravely mower is not even, it is not a good idea to lower it.
This can cause the mower to cut unevenly, leaving an unsightly lawn. Instead, adjust the deck height to the highest setting and level the mower before lowering the deck.
How do I level my Gravely mower?
To level your Gravely mower, you will need to adjust the deck height on each side until it is even. You can use a level or a piece of string to check the level of the deck.
Can I lower the deck on my Gravely mower if it is wet outside?
It is not recommended to lower the deck on your Gravely mower if it is wet outside. Wet grass can clog the mower and cause it to stall. Wait until the grass is dry before lowering the deck.
What should I do if I am having trouble lowering the deck on my Gravely mower?
If you are having trouble lowering the deck on your Gravely mower, check the owner’s manual for troubleshooting tips. If you’re still having problems, talk to a Gravely dealer or service technician for help.
How do I lower the deck on my Gravely mower?
Follow these steps to lower the deck on your Gravely mower:
- Park your mower on a flat surface and turn off the engine.
- Disconnect the spark plug wire to prevent an accidental engine start-up.
- Locate the pins or bolts that hold the deck in place.
- Use a set of pliers, a wrench, or a socket set to remove the pins or bolts.
- Slowly lower the deck by adjusting the deck lift lever or the deck height adjustment knob.
- Check the height of the deck before and after lowering it to ensure that it is even on both sides.
- If the deck is too low, raise it to the desired height and secure it in place with the pins or bolts.
- Reconnect the spark plug wire and start the engine to test the deck height and cut quality.
Read 11 Common Gravely Mower Electrical Problems(With Solutions)
Final Remarks
Lowering the deck on your Gravely mower is a quick and easy process that can make a big difference in the appearance of your lawn.
By following the steps above, you can lower the deck on your Gravely mower and always get the best cut.
Remember to maintain your mower on a regular basis to keep it running smoothly and to enjoy a beautiful lawn all season.
