John Deere 7200 Planter Rate Chart(Complete Guide)

Precision planting is the cornerstone of successful crop production. The John Deere 7200 Planter Rate Chart is your go-to resource for optimizing seeding rates, minimizing waste, and ensuring consistent crop emergence. Whether you’re seeding corn, soybeans, or cotton, understanding how to use the planter’s rate chart correctly can directly impact your yields and bottom line.

John Deere 7200 Planter Rate Chart

(30-Inch Rows)

Crop	Seed Meter	Target Population (Seeds/Acre)	Input Sprocket (Teeth)	Driver/Driven Sprocket	In-Row Spacing (Inches)
Corn	Finger Pickup	28,000	48 (Low Range)	35/24	7.5
Corn	Finger Pickup	30,000	48 (Low Range)	29/24	7.0
Corn	Finger Pickup	32,000	48 (Low Range)	24/24	6.5
Corn	Finger Pickup	34,000	18 (High Range)	35/28	6.2
Corn	Finger Pickup	35,600	18 (High Range)	29/28	5.9
Corn	Finger Pickup	38,000	18 (High Range)	24/28	5.5
Soybean	Flat Cell 24	140,000	48 (Low Range)	35/24	1.5
Soybean	Flat Cell 24	150,000	48 (Low Range)	29/24	1.4
Soybean	Flat Cell 24	160,000	18 (High Range)	35/28	1.3
Soybean	Flat Cell 24	170,000	18 (High Range)	29/28	1.2

Notes:

Input Sprockets: 18-tooth for high-range (higher populations), 48-tooth for low-range (lower populations).

Driver/Driven Sprockets: Common sizes include 35, 29, 24 (driver) and 24, 25, 26, 27, 28 (driven).

In-Row Spacing: Calculated as (30 inches × 43,560 sq ft/acre) ÷ population, rounded to one decimal place.

Field Conditions: For no-till, select a slightly lower population setting to account for reduced wheel slippage (10-15% in tilled soil).

How to Use the John Deere 7200 Rate Chart

To use the rate chart, follow these steps:

Determine Target Population: Decide the desired seeds per acre based on crop type, soil conditions, and yield goals. For instance, corn at 34,000 seeds per acre, or soybeans at 160,000 seeds per acre.
Identify Row Spacing: The John Deere 7200 typically operates on 30-inch rows, but confirm your planter’s configuration.
Select Sprocket Combination: The rate chart lists combinations of input sprockets (e.g., 18 or 48 teeth for high or low range) and driver/driven sprockets on the planter’s transmission shafts. Match the combination to your target population.
Adjust for Field Conditions: In no-till conditions, wheel slippage is reduced, which may increase seed drop. Adjust to a slightly lower rate (e.g., the next lower sprocket setting) to compensate, as the charts assume about 10-15% slippage in tilled soil.

Common Crop Seeding Rates

Corn Seeding Recommendations

Corn generally performs best at 30,000–34,000 seeds per acre, depending on hybrid and soil moisture.

Soybeans Seeding Settings

For soybeans, you’re looking at 120,000–160,000 seeds per acre, adjusted for row width and soil fertility.

Cotton Planting Details

Cotton requires finer adjustments, typically 35,000–50,000 seeds per acre with tight row spacing.

Factors That Affect Seeding Rates

Ground Speed

Faster speeds increase the chance of skips and doubles. Stick to the recommended 4.5–5.5 mph for accurate drops.

Seed Plate Selection

Each seed size requires a matching plate to ensure proper singulation.

Tire Pressure and Slippage

Inconsistent tire inflation leads to incorrect gear ratio readings. Check tire pressure before each planting session.

Calibrating the John Deere 7200 Planter

Step-by-Step Calibration Guide

Fill hoppers and mark a 1/100-acre distance (about 174.2 ft for 30” rows).
Run the planter over the marked strip.
Count seed drop from each row.
Adjust gears if output doesn’t match the desired population.

Maintenance Tips to Ensure Accuracy

Clean seed tubes regularly.
Lubricate sprockets and chains.
Replace worn or cracked plates.
Store in a dry, covered area.

Benefits of Using OEM Rate Charts

Using original John Deere rate charts ensures:

Highest seeding accuracy
Compatibility with OEM parts
Extended equipment lifespan