Toro TimeCutter Valve Adjustment(In 5 Quick Steps)

When it comes to maintaining your Toro TimeCutter lawn mower, one crucial aspect that shouldn’t be overlooked is valve adjustment.

Proper valve adjustment ensures optimal engine performance, smooth operation, and improved fuel efficiency.

In this post, we will provide you with a comprehensive guide on how to adjust the valves on your Toro TimeCutter, enabling you to keep your machine in top-notch condition.

So, let’s dive in and learn how to perform a valve adjustment on your Toro TimeCutter.

Toro TimeCutter Valve Adjustment

Toro TimeCutter Valve Adjustment

Understanding Valve Adjustment

Valve adjustment is the process of setting the correct clearance between the valves and the corresponding valve train components.

Over time, due to engine wear and thermal expansion, the valve clearance can change, leading to poor engine performance.

Adjusting the valves ensures that the intake and exhaust valves open and close at the precise timing, allowing for efficient combustion and maximum power output.

Tools Required

Before you begin the valve adjustment process, gather the following tools:

  • Socket set
  • Feeler gauge
  • Torque wrench
  • Screwdriver
  • Valve adjustment tool (if required)

Having these tools readily available will make the valve adjustment procedure easier and more efficient.

Read Toro 21386 Problems(3 Quicks Ways To Fix)

Preparing for Valve Adjustment

To start the valve adjustment, follow these preparatory steps:

  • Park your Toro TimeCutter on a level surface and engage the parking brake.
  • Allow the engine to cool down completely before proceeding with any maintenance tasks.
  • Disconnect the spark plug wire to prevent accidental engine starts.

Removing the Valve Cover

To access the valves, you’ll need to remove the valve cover. Here’s how:

  • Locate the valve cover on top of the engine.
  • Use the appropriate socket size to loosen and remove the bolts securing the valve cover.
  • Carefully lift off the valve cover and set it aside.

Locating the Valves

With the valve cover removed, you can now locate the valves. In most Toro TimeCutter models, the valves are easily visible and accessible on the engine block. 

Measuring Valve Clearance

Accurate measurement of valve clearance is crucial for proper adjustment. Follow these steps to measure valve clearance:

  • Identify the intake and exhaust valves.
  • Rotate the engine’s crankshaft to the top dead center (TDC) position for the corresponding cylinder.
  • Insert the appropriate feeler gauge between the valve stem and the rocker’s arm.
  • Gently slide the feeler gauge back and forth until you feel slight resistance.
  • Note the feeler gauge size that provides a snug fit. This is the valve clearance measurement.

Read 7 Toro V-Twin 708cc Engine Problems(With Solutions)

Adjusting Valve Clearance

To adjust the valve clearance, use the following steps:

  • Loosen the lock nut located on the rocker’s arm.
  • Turn the valve adjustment screw clockwise to decrease clearance or counterclockwise to increase clearance.
  • Check the valve clearance using the feeler gauge after each adjustment.
  • Once the correct clearance is achieved, hold the valve adjustment screw in place and tighten the lock nut.
  • Repeat the process for each valve, ensuring proper clearance for all.

Reinstalling the Valve Cover

After completing the valve adjustment, it’s time to reinstall the valve cover:

  • Clean the valve cover gasket surface to ensure a proper seal.
  • Place the valve cover back in position.
  • Insert and hand-tighten the valve cover bolts.
  • Use a torque wrench to tighten the bolts to the manufacturer’s specified torque.

Read How to Start a Toro Lawn Mower without Primer(step by Step)

Testing the Valve Adjustment

To ensure that the valve adjustment was successful, follow these steps:

  • Reconnect the spark plug wire.
  • Start the engine and let it idle for a few minutes.
  • Observe the engine’s performance, including smooth idle and consistent power output.
  • Listen for any abnormal noises or valve-related issues.
  • If everything sounds and feels normal, the valve adjustment was successful.

Maintenance Tips for Valve Adjustment

To maintain the optimal performance of your Toro TimeCutter, keep the following tips in mind:

  • Regularly check and adjust the valve clearance according to the manufacturer’s recommended intervals.
  • Use high-quality engine oil and replace it at the recommended intervals.
  • Keep the air filter clean to prevent debris from entering the engine and affecting valve performance.
  • Inspect the spark plug regularly and replace it if necessary.

Read How to Charge Toro Electric Start Mower(In 5 Steps)

Common Toro Valve Adjustment Problems

While performing a valve adjustment, you may encounter some common issues:

  • Incorrect valve clearance measurement: Ensure that the feeler gauge is inserted correctly and provides a snug fit.
  • Stuck valve adjustment screw: Apply penetrating oil to loosen any stuck adjustment screws.
  • Damaged valve components: Inspect the valves, rocker arms, and other related components for signs of wear or damage and replace them if needed.

Troubleshooting Valve Adjustment Problems

If you experience problems with your Toro TimeCutter after valve adjustment, consider these troubleshooting steps:

  • Check for loose or incorrectly adjusted valve components and re-adjust if necessary.
  • Inspect the valve springs for proper tension and replace them if worn or damaged.
  • Consult the Toro TimeCutter’s user manual or contact a qualified technician for further assistance.

Read Lawn Mower Makes Grinding Noise When Trying to Start(Solved)

What is the torque on spark plugs for a Toro Timecutter?

The recommended torque specification for spark plugs in a Toro TimeCutter is 22 ft-lbs (foot-pounds). It is important to tighten the spark plugs to this specific torque to ensure proper installation and optimal engine performance.

Using a torque wrench set to 22 ft-lbs, carefully tighten the spark plugs to the manufacturer’s specified torque.

This will help prevent over-tightening or under-tightening, which can lead to issues such as improper combustion and potential damage to the spark plug threads or cylinder head.

Always refer to Toro TimeCutter’s user manual for the correct torque specification for your specific model.

What oil does a Toro TimeCutter take?

The recommended oil for a Toro TimeCutter is 30/10W-30 Synthetic CK4. This specific type of oil is formulated to meet the requirements of small engines and lawn mower applications.

Using synthetic oil provides excellent lubrication and helps to enhance the performance and longevity of the engine in your Toro TimeCutter.

It is important to follow the manufacturer’s guidelines and specifications for oil selection to ensure optimal performance and proper maintenance of your equipment.

Read Riding Mower Making Noise When Blades Are Engaged(Fixed)

What engine is on a Toro TimeCutter?

The Toro TimeCutter is equipped with a powerful Toro Commercial V-Twin engine, boasting a displacement of 708 cc (cubic centimeters) and a robust horsepower rating of 24.5 hp (horsepower).

This V-Twin engine provides reliable performance, durability, and the necessary power to efficiently tackle various mowing tasks with your Toro TimeCutter.

Its commercial-grade design ensures a smooth and efficient operation, allowing you to achieve excellent cutting results while maintaining optimal fuel efficiency.

Read Kawasaki Liquid Cooled Engine Problems(7 Quicks Ways To Fix)


How often should I adjust the valves on my Toro TimeCutter?

Valve adjustment frequency may vary depending on the model and engine type. Refer to your Toro TimeCutter’s user manual for specific recommendations.

Can I use any feeler gauge for valve clearance measurement?

It is recommended to use a feeler gauge specifically designed for engine valve clearance measurement.

What are the symptoms of incorrect valve clearance?

Symptoms of incorrect valve clearance may include rough idle, reduced power, and excessive valve noise.

Can I perform a valve adjustment myself, or should I consult a professional?

If you have basic mechanical skills and the necessary tools, you can perform a valve adjustment on your Toro TimeCutter. However, if you’re unsure or uncomfortable, it’s best to seek assistance from a qualified technician.

Why is valve adjustment important?

Valve adjustment ensures proper engine performance, fuel efficiency, and longevity. Neglecting valve adjustment can lead to engine damage and decreased mowing efficiency.

Read How to Adjust Steering on Zero Turn Mower(step by step)

Final Remarks

Proper valve adjustment is a vital aspect of maintaining your Toro TimeCutter lawn mower.

By following the step-by-step guide outlined in this article, you can effectively adjust the valves and ensure optimal performance.

Regular valve maintenance will keep your Toro TimeCutter running smoothly and efficiently, allowing you to enjoy a well-maintained lawn for years to come.

For help on your Toro valve, reach out to Toro Support

Read How to Adjust Seat on Husqvarna Riding Mower(Easily)

George Bill
George Bill

George Bill is a Mechanical Engineer by Profession and an avid gardener and has been mowing his lawn for over 20 years. He has used a variety of different mowers during this time.
George is an expert at maintaining his mowers and over the years, he has learned many tricks and techniques for getting the best results from his mowers and is always happy to share his knowledge on this site.